Next Certificate Program Start: 10/10/2022  |  Next Associate Degree Program Start: 10/03/2022

Next Certificate Program Start: 06/06/2022  |  Next Associate Degree Program Start: 07/05/2022

Next Certificate Program Start: 10/10/2022  |  Next Associate Degree Program Start: 10/03/2022

BLOG

START YOUR HEAVY EQUIPMENT TRAINING

Mobile Crane Setup Tips: Steps for Safer Crane Setups

Construction safety should be at the top of everyone’s priority list, yet accidents due to negligence still occur on sites across the country. Whether you are operating a mobile crane or some other heavy equipment, you must do so safely. Even slight errors can result in injury or death. From planning and preparation to maneuvering the vehicle around the job site, every step should be considered carefully. Let’s take a look at some mobile crane setup tips that can help you maintain a safe working environment.

Crane Setup Steps:

Following the correct mobile crane setup procedure is the easiest way to reduce the chances of an accident occurring. On top of that, following the mobile crane setup tips below will help you plan effective and efficient use of personnel and equipment.

Begin Preparation

Before using the mobile crane, there needs to be a plan in place. Imagine lifting heavy objects and materials without knowing where it needs to be or how the lift will be conducted? Instead, you should develop a plan that addresses any concerns or hazards. Starting your planning and preparation early is one of the easiest ways to ensure your lift is safe.

 

Research and Implement Official Requirements

As part of your planning process will be researching requirements and procedures that may impact your work. For example, if you’re operating in a location you’re unfamiliar with there may be some rules and regulations you’ll need to comply with. Outside of rules and regulations you’re unfamiliar with, there are OSHA and ASME rules you must know and comply with.

 

Develop a Lift Plan

Another important part of safe mobile crane operations is developing a lift plan. If you’re unfamiliar with the process, a lift plan outlines the procedures of a lift in detail. Things such as the mass of the load being lifted, a diagram of the lift, and the names of those involved need to be included in the plan.

 

Double-Check the Placement

During the planning process, you’ll need to establish where you want to place the mobile crane. The location you choose should be accessible for the type of crane you’ll be using, in this case, a mobile crane. You also want to leave enough space for all of the additional equipment you’ll be using too. Once you’ve found the spot, double-check everything to ensure any problems aren’t due to misplacement. It might be easy to skip this step, but you can avoid future problems and frustration with a simple double-check.

 

Choose the Right Crane Pads or Outrigger Pads Size

It would be difficult to perform a lift without the right crane pads or outrigger pads. These crucial crane components are designed to distribute the load from the outrigger float over a large enough area so that the bearing pressure to the ground surface is acceptable.

 

Inspect the Ground

A ground inspection of the area you’ll be placing the crane can help you avoid unsuitable soil conditions. There are several criteria you should consider including if the soil has been or needs to be drained. You should also check if the soil has the right bearing strength. One way to tell if it has the right bearing strength is to check if the solid is compact. Lastly, you’ll need to consider if any hazards lay below the surface.
If after your inspection you find out the soil conditions are not ideal you essentially have two choices. Either you must pick a new spot to perform the lift from or you’ll need to improve the soil conditions. It may not be possible to set up the mobile crane in a new location, so in some cases, you only have one choice.

 

Identify Any Hazards

When it comes to identifying hazards, you need to consider those around you, above you, and below the surface. Seeing that construction environments are constantly changing as the project progresses you’ll need to keep an eye out for anything in the way. These could be power lines overhead or fellow workers around the site.

8 Safety Measures to Ensure a Safer Construction Site

Preventative measures that ensure safety on a worksite are called control measures. Here are eight control measures that can help prevent struck-by injuries in construction and ensure a safer working environment.

OSHA Guidelines to Consider

As you go through the above steps you must also consider whether you’re complying with OSHA guidelines.
In some cases, the local regulations you need to know are similar to the ones OSHA wants you to follow. However, there may be additional guidelines you’ll need to comply with to perform a safe lift. Failure to follow OSHA guidelines can result in fines in addition to any damages or injury.

Start Your Career in Heavy Equipment Industry

Take your heavy equipment training seriously by enrolling in one of HEC’s programs around the country. 

Get Mobile Crane Education at HEC

Imagine being able to get the career education, training, and mobile crane certification you need in as little as three weeks. That’s what HEC offers you and so much more. Our Heavy Equipment Operations – Mobile Crane program combines hands-on training with in-class education from experienced instructors. At HEC, our goal is to help you prepare for a rewarding career in construction and our assistance doesn’t stop in the classroom.

 

Graduates of HEC’s programs have the opportunity to use our career services to help them find employment. We also have special locations dedicated to veterans and active military members who are seeking a smooth transition to civilian life with a career in construction. Don’t hesitate to visit our locations, read up on our programs, or apply today!

OPEN THE DOOR TO A NEW CAREER!

© 2022 Heavy Equipment Colleges of America. All Rights Reserved. | Privacy Policy

mf-schools
new-cco-logo_metallic_tm_300x300